Rocket Products Fan Mount Assembly
Choose 'Description' drop down on the left or below for more details!
Rocket Products Fan Mount Assembly is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Care information
Care information
Read the Blogs for handy information!
Delivery and Shipping
Delivery and Shipping
Free shipping on orders over $129!
Description
Description
Note: Fan systems for car models are now located under their own model in the top dropdown menu named "Race Cars" (or click HERE)! Take a look there for all fan mount systems!
Designed specifically for individual Sprint Car models to position Team Power Products Aluminum 30mm & 40mm fans in the correct position for best cooling (also works with all appropriately sized fans by other manufacturers). The mount includes a built in 'velocity stack' that effectively increases cooling volume with minimal increase in power draw for an additional 15-20 degrees temp reduction! Lightweight, rugged construction, average weight 9 grams or less (with stainless mounting hardware included).
Fan Mounts designed by Ron Free (Rocket Products) and manufactured in the USA by Team Power Products!
Model Notes:
- Custom Works Outlaw 4 - Tested for Outlaw 4 only, may work with earlier models, we have not the opportunity to test except for CW Outlaw 4. Works with all Triple P Chassis upgrades.
- Custom Works Outlaw 5 - Complete kit with hardware designed specifically for the new Custom Works Outlaw 5! New rear suspension requires a newly designed base mount to clear the cross brace. Works with all Triple P Chassis.
- Custom Works Rocket 4 LM (mid-motor) - Tested and ready. Choose the same model as for Outlaw 4 in either 30mm or 40mm models.
- GFRP - Laydown: Designed to for all Sprint and Late Model cars with the laydown transmission.
- Associated - If you have an Associated based car (like Velocity) which uses the Associated Transmission (B6.1 & later) WITHOUT the 'waterfall' brace, then this is the kit you want.
Add the optional custom TPP aluminum cooling fan in 30mm and 40mm sizes (fan blades are a rugged plastic inside aluminum case) at the same time as mount purchase and save more than 20% on fan price! These fans were specifically designed to work at 8v (not 12v or 5v) for high efficiency, low current draw, and high CFM! 30mm fan details HERE and 40mm fan details HERE.
This fan mount is a complete kit with all parts needed for install, including stainless hardware.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Team Preferred Products!
Our selection of custom products!
| Facet | |||||
|---|---|---|---|---|---|
| By | |||||
| By | Team Power Products | Rocket Products | Rocket Products | Rocket Products | Rocket Products |
| Price | |||||
| Price |
From
$50.00
Unit price
/
Unavailable
|
$15.00
Unit price
/
Unavailable
|
From
$14.00
Unit price
/
Unavailable
|
$13.00
Unit price
/
Unavailable
|
From
$5.99
Unit price
/
Unavailable
|
| Description | |||||
| Description | ROAR Approved November 2022 After eighteen months of more testing, the R6 Pro Series Modified motors are now ready to... | Note: Fan systems for car models are now located under their own model in the top dropdown menu named "Race... | This bracket makes it a simple task to remove the cage from a Customer Works Sprint 4 or 5 without... | The X Brace is used on Sprint Cars to reduce the top wing from becoming a big, wagging weight on... | These are simple parts but having them pre-made saves a lot of time when your sprint gets run over and... |
