Adding product to your cart
A great power plant for heavy cars or super high bite track surfaces, the R3.0 series of 4 Pole motors have been winning races since their introduction in 2018. With 4 pole rotors and 12 segment stators, this series accelerates heavy cars such as SC Modified cars in Oval racing extremely well, outpacing their 2 pole cousins. May also be useful in lighter cars, such as 1/10th scale Late Model, on carpet tracks.
The 4000KV motors are perfect for slick tracks or novice racing. Most cars will like the 4600KV motor for almost all situations except really high bite tracks. The 5400KV motor is a brute, excels on big tracks and high bite.
All these motors come with 5mm shaft for the demands of these heavy cars. All the variants have zero, fixed timing; add 15 degrees in your ESC as a starting point (watch your temperature, do not exceed 160 degrees F).
Jody M.
Motor has a ton of power and runs great! Team Power Products are very knowledgeable and helpful with getting me the best setup I needed for my 2020 Prodigy SC Mod. Thank you.
Tom K.
Very helpful and friendly
Visit them in person if you can
Ron H.
Many of our team mates , Adam Burkholder,Craig Page, James Dibble, and Hunter Hay use Marks Batteries and Motors. So here goes not to brag, Ron Hay winner Tulsa ok 64 cars, Craig Paige winner Enid Ok 54 cars , Adam Burkholder runner up Enid Ok 54 cars, James Dibble runner up Wichita 50 plus cars, Hunter Hay low et Wichita, like I have said Marks products can run with any other product !!!
Earl B.
Smoothest 4pole motor on the market. Plenty of straightaway speed without knocking the tires off on the bottom end.
Micheal K.
Bought a 4600KV and won the RC Pro South Series Race in Dale, Texas this past weekend. Great torque and smooth power band. As always PowerProducts continues to Power Winners.
Stuart T.
Super fast shipping and quality. Highly recemand!!
TIMOTHY D.
Marks stuff is top notch, these batteries pack some punch and have great numbers!!
luke m.
Made my e revo way more responsive and faster, very fast shipping and service
Steve D.
This motor is all you would want it to be! Mark sets zero timing so I put 15 degrees of timing in my ESC as Mark suggested in the instructions, very smooth , tons of power, and actually a smaller can than the HW and Tekin which helps a lot in putting the sensor wire in! I would recommend this motor for any racing application!!
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
