Rocket Rear Weight Mount & Weights

Adjusting rear weight bias for changing track conditions is an important tuning aid. And adding weight to the rear arms can be doubly helpful. There are a variety of methods such as brass hubs, brass arm inserts, etc., but you cannot do this just prior to a race. "Rocket" Ron Free thinks there must be a faster way.

This weight mount works on Custom Works, GFRP, etc. based adjustable rear arms. The mount may be used on both rear arms if you wish, as it fits on the front side of either arm. Removing one screw can install or remove weights (1/16" hex); this quick-change feature is very valuable when making final adjustments during pre-race warm up.

Using carbon fiber construction, this mount is attached to the rear arm as shown for a solid connection with two stainless screws (4-40). One screw is used to retain the weight (4-40) to the mount; multiple holes in the mount allow you to slide the weight in and out for more or less effect. Any 'kit' option does not include any other parts except as detailed in description.

The weights are:

• Small Brass: 9.3g, 0.33 oz.
• Large Brass:18.7g, 0.66 oz.

You have several options from which to choose. You can buy:

1. Carbon Fiber Mount, three stainless screws, large & small brass weight.
2. Carbon Fiber Mount, three stainless screws, & small brass weight.
3. Carbon Fiber Mount, three stainless screws, & large brass weight.
4. Carbon Fiber Mount, three stainless screws, no weights (no rear arm is included).
5. Small brass weight only, no screws.
6. Large brass weight only, no screws.
7. Small & large brass weights, no screws.

Or you can save money by doing a little work by using DragRace Concepts steel weights (DRC-702 or DRC-701); you will need to drill and tap a hole in weights to attach to mount (recommend 4-40 screw). This mount also works with TLR331041 brass weight kit, which already has the mount hole.